Skip to main content

Simplicity of the blog can attract Adsense Ads


You might have read many blogs over the Internet about Google Adsense approval. But, reading different experience of the bloggers all over the blogs. I have also shared my experience and what led to me the approval of an Adsense account.

I used to get rejection mail and this happened for one month. After reading and changing my blog according to Google AdSense policies, i got approved.
First thing you should know that no one knows perfectly about Google approval policies and conditions, expect AdSense team. Every blogger discusses about his/her experience and problem faced in the path of getting an AdSense account. These types of blogs and content can only help you to understand about the biggest online advertisers for bloggers.

The 'Simplicity of the blog' is the biggest thing which can let you easily get an AdSense account. A fresh and newly started blogger should try to focus on his/her post content as the content is king policy comes first for getting an AdSense account. You no need to create a fantastic and perfect site. You can start with just personal and WordPress premium site and start posting articles with good quality and content which can solve out queries of the seekers on the search engines.

The Rules and changes i followed:

1. Content is king: Posting and Writing unique content not only attracts visitors, but also Adsense advertisers. Originality and Uniqueness of the contents are the important for every blogger before starting using ads tag on their blog.
2. No ad placement before getting approved from Adsense: This point should be remembered that no ads tag should be placed before approved from Google Adsense. While submitting application, make sure that your blog is not displaying any ads from other advertisers. However, you can place that ads after approval and if they don't violate Adsense policies.
3. No product purchase or sell on blog: Your blog should be content prospective and you can share any type of original content with word count from 300+ so that it can be more visible on search engines and also help Adsense which ads will more suitable for your blog's visitors.
4. No torrent or Affiliate links: If you have read the Google Adsense policies, you can not put torrent links or copyright material on your site or blog. You can not put affiliate banners before acceptance of application.
5. Must follow Google Adsense policies: Simply follow what has Google specified. You no need privacy policy, about page, disclaimer like pages. You simply blog and post with good content and then apply to Adsense, you will be accepted.

Don't loose hope is the most important for bloggers. If you started the blog on for earning from Adsense publisher, then remain focused on your content. When discuss someone about your blog and Google AdSense rejection, all will tell you about their experience and their thoughts and sometimes you may get negative response. I also did this and many said that your blog is on tech you will never get approved from AdSense, forget it. So, never lose as none knows about Adsense policies from internally.

I am not discussing any tips or trick to get Adsense account. It's just the experience which made me know about Google Adsense which i have not found over the Internet or any blog or by any blogger. Might be you are facing other problem or get approved in any other way by making changes.
So, don't forget to discuss about your journey in the comment or on your blog so that freshers can be aided in their journey as a blogger.

Comments

Popular posts from this blog

Buzzer interface with 8051 microcontroller

Buzzer  is a electronic device that converts the electronic signal into buzzing noise, that is applied to it. It can be used as electronic bell or as quiz buzzer in many applications around us. Here, i world like to discuss the interfacing of a small buzzer with 8051 microcontroller and how different projects can be constructed. Buzzer Interfacing: This project shows the interface with AT89S52 microcontroller to a buzzer. When a push button is pressed, the buzzer will get ON and OFF ( number of times set in the code ) and then stops. Circuit Diagram: - The port P1 of the microcontroller is connected to buzzer. This type of connection is possible, if the current requirements of the buzzer is not more than 20mA. The output is in current source mode so that buzzer will turn ON when the output of the port is logic LOW. Switch is connected to port P3 which remains at logic HIGH by pull up resistor.  Code: #include "REG52.h" #define buz P1 sbit SW=P3^0; long i...

Comparison Chart Between 8051, 8052, 8031and 8751

8051 is a popular 8-bit microcontroller and has been used in many applications since Intel introduced it. Many 8051 architecture are produced by Triscend, Intel, Atmel, Philips, Infineon (Siemens), ISSI, and Max Corp. Today, 8051 microcontrollers may not be popular but, the 8051 architecture is still popular and employed in thousands of embedded applications. This 8-bit architecture has been different segments such as 8052, 8051, 8751 and 8031 . 8052 is the super-set of 8051 and 8031 is the memory-less microcontroller hence, it has interfaced with external ROM. Whereas, 8751 chip has only 4Kbytes of on chip UV-EPROM. Everyone knows about the general 40-pin microcontroller i.e. 8051 introduced by Intel in 1980s and consists of serial communication pins, Timer, Interrupts, RAM, ROM. It has 4 ports and each port has 8 pins, total 32 pins and other 8 pins for other purposes. 8052 is the super-set of 8051 that consists of 8K bytes of internal RAM (4K in 8051), 256 by...

Different ways to generate delays in 8051

The delay length in 8051 microcontroller depends on three factors: The crystal frequency the number of clock per machine the C compiler. The original 8051 used 1/12 of the crystal oscillator frequency as one machine cycle. In other words, each machine cycle is equal to 12 clocks period of the crystal frequency connected to X1-X2 pins of 8051. To speed up the 8051, many recent versions of the 8051 have reduced the number of clocks per machine cycle from 12 to four, or even one. The frequency for the timer is always 1/12th the frequency of the crystal attached to the 8051, regardless of the 8051 version. In other words, AT89C51, DS5000, and DS89C4x0 the duration of the time to execute an instruction varies, but they all use 1/12th of the crystal's oscillator frequency for the clock source. 8051 has two different ways to generate time delay using C programming, regardless of 8051 version. The first method is simply using Loop   program function in which Delay() funct...