Skip to main content

How to Add Forms to your self-hosted WordPress blog

It is easy to create a form of any type and collect response of the visitors or customers. Now, the same a blogger can do for his or her premium website based on WordPress. But, there are few ways which can help you to create a form according to your need in WordPress using free plugins. There is also a way if you do not want to use any WordPress plugin. Let's see the methods to add a Form in your WordPress blog.

Methods to Add Form in Blog:

- Google Drive Form: This is a simple and the easiest step. Log-in to your Google Drive account and click on "Create" menu and then, click on "Form" to create one. Create the form according to your requirements and then, click on "Send Form" blue colour button on the top-right corner. A small window will pop up that is providing the link to share with world. Now, click on "Embed" option provided on the right of the link



Now, you will see the HTML code of your form and edit options to edit width and height of your Google Doc Form. This HTML code can be placed in post, page of your self-hosted WordPress blog.




- WordPress Google Form Plugin: This is a free plugin at wordpress.org that provides short code to embed Google Doc Form created by you in Google Drive. It is easy-to-use plugin that allows to embed Google Form by using Google Form URL. It uses two short code- [wpgform id='post-id'] and [gform form='Google-Form-URL'] . Now, you only need to create a Form using Google Drive feature.

- Using Jetpack plugin: Jetpack by WordPress.com plugin is the most popular and downloaded plugin on WordPress.org. It provides many and integrated features of WordPress.com blog in one plugin so that you no need to install different plugins for every distinct requirements on your WordPress.org blog.

One of the feature provided by Jetpack is Contact form. This contact form button can be seen along the 'Add Media' button in your post or pages. Click on the 'Contact' option(as shown in image above) and a window will pop up on the same screen where you can edit the form according to your need for your blog. You can create different and unique form for every posts and pages.
Labels:

Comments

  1. unknownJune 23, 2021 at 12:19 AM

    ne of the feature provided by Jetpack is Contact form. This contact form button can be seen along the 'Add Media' button in your post or pages.
    how to add a contact from in wordpress

    ReplyDelete

Post a Comment

Popular posts from this blog

Buzzer interface with 8051 microcontroller

Buzzer  is a electronic device that converts the electronic signal into buzzing noise, that is applied to it. It can be used as electronic bell or as quiz buzzer in many applications around us. Here, i world like to discuss the interfacing of a small buzzer with 8051 microcontroller and how different projects can be constructed. Buzzer Interfacing: This project shows the interface with AT89S52 microcontroller to a buzzer. When a push button is pressed, the buzzer will get ON and OFF ( number of times set in the code ) and then stops. Circuit Diagram: - The port P1 of the microcontroller is connected to buzzer. This type of connection is possible, if the current requirements of the buzzer is not more than 20mA. The output is in current source mode so that buzzer will turn ON when the output of the port is logic LOW. Switch is connected to port P3 which remains at logic HIGH by pull up resistor.  Code: #include "REG52.h" #define buz P1 sbit SW=P3^0; long i...
14 comments
Read more

Comparison Chart Between 8051, 8052, 8031and 8751

8051 is a popular 8-bit microcontroller and has been used in many applications since Intel introduced it. Many 8051 architecture are produced by Triscend, Intel, Atmel, Philips, Infineon (Siemens), ISSI, and Max Corp. Today, 8051 microcontrollers may not be popular but, the 8051 architecture is still popular and employed in thousands of embedded applications. This 8-bit architecture has been different segments such as 8052, 8051, 8751 and 8031 . 8052 is the super-set of 8051 and 8031 is the memory-less microcontroller hence, it has interfaced with external ROM. Whereas, 8751 chip has only 4Kbytes of on chip UV-EPROM. Everyone knows about the general 40-pin microcontroller i.e. 8051 introduced by Intel in 1980s and consists of serial communication pins, Timer, Interrupts, RAM, ROM. It has 4 ports and each port has 8 pins, total 32 pins and other 8 pins for other purposes. 8052 is the super-set of 8051 that consists of 8K bytes of internal RAM (4K in 8051), 256 by...
5 comments
Read more

Different ways to generate delays in 8051

The delay length in 8051 microcontroller depends on three factors: The crystal frequency the number of clock per machine the C compiler. The original 8051 used 1/12 of the crystal oscillator frequency as one machine cycle. In other words, each machine cycle is equal to 12 clocks period of the crystal frequency connected to X1-X2 pins of 8051. To speed up the 8051, many recent versions of the 8051 have reduced the number of clocks per machine cycle from 12 to four, or even one. The frequency for the timer is always 1/12th the frequency of the crystal attached to the 8051, regardless of the 8051 version. In other words, AT89C51, DS5000, and DS89C4x0 the duration of the time to execute an instruction varies, but they all use 1/12th of the crystal's oscillator frequency for the clock source. 8051 has two different ways to generate time delay using C programming, regardless of 8051 version. The first method is simply using Loop   program function in which Delay() funct...
5 comments
Read more